LPMS Spectra-Melt Complementary Materials

Support Products for your Daily Tasks.

Reliable Helper for your Daily Tasks
Spectra-Melt Complementary Products

Spectra-Melt Complementary Materials range from cleaner to primer products and have been developed to support you as best as possible.

With our Spectra-Melt cleaning range the removal of hot melt adhesive from tanks, hoses and equipment becomes childplay.

Thus, LPMS cleaning products help customers to optimise machine efficiency, reduce down time and prevent internal contamination that can result in blocked nozzles and viscosity inconsistencies.

LPMS Melt Tank Instruction

Cleaning the melt tank is critical for successful operations. It is recommended to be done every 80-300 hours of heat cycles (depending on the consumption of materials. Higher consumption will decrease the interval). The LPMS Melt Tank Instruction provides a step by step assistance in order to secure a successful cleaning of your melt tank.

Spectra-Melt
Complementary Materials

SPECTRA-MELT Complementary Materials

OMEGA PURGE 200

SPECTRA-MELT OMEGA PURGE 200 is a thermoplastic hotmelt polyamide resin used for purging tanks, hoses and equipment to remove loose carbon particles (char) or when a resin color change is necessary. The material is used for purge only and is not a reactive cleaner.

SPECTRA-MELT Complementary Materials

OMEGA PURGE 225

SPECTRA-MELT OMEGA PURGE 225 is a thermoplastic hotmelt polyamide resin used for purging tanks, hoses and equipment to remove loose carbon particles (char) or when a resin color change is necessary. The material is used for purge only and is not a reactive cleaner.

SPECTRA-MELT Complementary Materials

EPSILON MELT TANK CLEANER

The technical and safety data instructions for the Epsilon Melt Tank Cleaner help customers to maximise the safety of their tank cleaning process.

SPECTRA-MELT Complementary Materials

OMEGA RELEASE

Silicone and Phthalate free single component solvent based release system with low VOC. Ideal for low pressure molding to assist in easily removing parts from tooling with strong high temperature stability. Available in brush on and aerosol kits.

SPECTRA-MELT Complementary Materials

PRIMER 362 / CURATIVE 362

Two component adhesive system to promote adhesion, especially suited for automotive, medical and hi-temperature industrial applications.

LPMS USA’s Spectra-Melt line of molding products incorporates cutting-edge additives and low-density fillers to enhance materials’ properties.

Cost Savings Calculator

Our low pressure molding solutions open up great savings opportunities for you. Use our cost savings calculator to identify your individual savings potential.

Get in Touch

LPMS USA
1441 Branding Lane, Suite 110
Downers Grove, IL 60515
Tel: +1 (800) 353-7773

Application Checklist

Tell us about your project, and an LPMS USA representative will contact you for assistance.